Model – 129FLE 120 volt
INSIDE DIMENSIONS: 11 ¼” WIDE X 9 ” DEEP X 9 ¾” HIGH AT THE PEAK, FIRES TO CONE 6/2250°F
Front-loading designed kilns make it easy to load and unload items and for annealing. This electric model comes equipped with a pilot light, attached stand, stainless steel jacket, and Bartlett 3K-CF or 3 Key electronic controllers. Data is entered by scrolling through the up and down arrows for the desired cone fire or ramp/hold programming.
Upgrade to the Genesis touchscreen controller or the 12 key digital Bartlett V6-CF or RTC-1000 controller for more ramp-hold user programs and multiple features including delay start, preheat, cone offset, skip-step, and many more for precise firings every time. Messages and Information are available for reviewing a firing profile before or during the firing, viewing the current segment the firing is in, and cone table for easy lookup of temperature and cone number equivalents. Other options include a bead door, quartz viewing window, Type S thermocouple, castors, vent, and much more!
Furniture Kits for Front Loading electric models provide 2-3 layers of shelving, assorted posts, and a one-pound bag of kiln wash. Choose the standard furniture kit or build your own with shelves and posts in the quantities required.
Specific Kiln Information
|
MODEL
|
129FLE
|
WIRING SPECIFICATIONS
|
|
Equipped with Lid Lift Assist
|
N/A
|
120 Volts
|
|
Inside Chamber Dimensions w x d x h (inches)
|
11.25 x 9 x 9.75
|
15 Amps
|
|
Cubic Feet
|
.48
|
1800 Watts
|
|
Outside Dimensions with Stand or Frame w x d x h (inches)
|
23.5 x 14 x 22.5
|
20 Amp Breaker Required
|
|
Brick Thickness
|
2.5″
|
Plug Configuration: NEMA 5-15
|
|
Maximum Temperature
|
Cone 6-2250°F/1232°C
|
Copper Wire Size: #12, #10 if the circuit is longer than 40 ft
|
|
Est Ship Wt
|
75 lbs, ground/110 lbs with guillotine lift, freight
|
