Model – 1214 E Raku E 120 volt
Inside Dimensions: 11 ¼” wide x 13 ½” deep, fires to cone 4/2100°F
The 1214 E Raku comes equipped with a metal frame, stainless steel jacket, and Bartlett 3K-CF electronic controller. Data is entered by scrolling through the up and down arrows for the desired cone fire or ramp/hold programming.
Additional options include upgrading to the Genesis touchscreen controller or the 12 key digital Bartlett V6-CF or RTC-1000 controller for more ramp-hold user programs and multiple features including delay start, preheat, cone offset, skip-step, and many more for precise firings every time. Messages and Information are available for reviewing a firing profile before or during the firing, viewing the current segment the firing is in, and cone table for easy lookup of temperature and cone number equivalents. Other options include Type S thermocouple, castors, vent, and much more!
Furniture Kits for Electric Raku and TopHat models provide 2-3 layers of shelving, assorted posts, and a one-pound bag of kiln wash. Choose the standard furniture kit or build your own with shelves and posts in the quantities required.
Specific Kiln Information
|
MODEL
|
1214 E RAKU E
|
WIRING SPECIFICATIONS
|
|
Equipped with Firing Chamber Lift Assist
|
Yes
|
120 Volts
|
|
Inside Chamber Dimensions w x d x h (inches)
|
11.25 x 13.5
|
16 Amps
|
|
Cubic Feet
|
.86
|
1920 Watts
|
|
Outside Dimensions with Stand or Frame w x d x h (inches)
|
26 x 54
|
20 Amp Breaker Required
|
|
Brick Thickness
|
3″
|
Plug Configuration: NEMA 5-20
|
|
Maximum Temperature
|
Cone 4-2100°F/1149°C
|
Copper Wire Size: #12, #10 if the circuit is longer than 40 ft
|
|
Est Ship Wt
|
185 lbs
|
